I went to the fire department today and talked to the chief.
Good guy.
I went there to ask if he had any info on building materials or could explain a whole bunch of acronym crap on the fire ratings and stuff on some materials I am considering covering the polystyrene with.
He said 5/8" dry wall. If not that, consult an architect, basically.
Said definitely do NOT have exposed polystyrene because it's made of oil and goes up quick. Says it also melts & drips as it burns and on the ceiling it would be like getting bombed with napalm and you wouldn't be able to find your way out because it makes tons of black smoke too.
So,.. No insulation at all on the workshop side of the rack wall. We can put it over the plywood on the unheated side later,since sparks from welding and cutting are the only things that would be a fire risk & there will be no welding and stuff going on in the cold side.
For the ceiling, our plan was to make a drop ceiling framed in 1x4's using 4'x8' sheets of 3" R-17 extruded polystyrene sheets with the foil reflective stuff on one side.
Fire chief says if I have a car in the workshop, just a simple little engine fire that I can quickly put out with an extinguisher can cause temperatures at the ceiling hot enough for that polystyrene to burst into flames even if actual flames don't reach within 6 feet of it.
So,... store bought drop ceiling.
Geezer & I were at Menard's to get ten sheets of plywood. Looked at the drop ceiling stuff. It's fire rated to like 800 degrees.
840 ft², math works out to roughly $500.
Paperless fiberglass mats, ten inches thick, R-30 would be $250.
Didnt get any of that stuff but that's the plan now. Probably put this bubble stuff atop the fiberglass.
It's plastic but it'll be above the drop ceiling & insulation. Won't be a fire hazard cuz by the time flame or intense heat reaches it, the building is f***ed anyway.
Aluminized polyester? Bubble wrap. Stops 94% of Radiant heat.
My phone capitalizes Radiant because of Mike's old truck.
This stuff is definitely worth some research though.
@Blood
View attachment 36805
View attachment 36806
View attachment 36807
It's just bubble wrap but has some impressive R values depending on how it's installed.
With a 1-¾" air gap on both sides it's got the same R value as 2" polystyrene.
$43 something for 100 ft². 4' x 25'.
On the innernet you can get a 100 ft roll for like $70 something though.
It's really light too. I pretended it was heavy and said "man this stuff uses some heavy foil like sheet metal or something" and handed it to my dad. When he grabbed it, he hit himself in the chin with it because he was preparing for it to be heavy. I could have thrown it at a big living room window without breaking it. It weighs nothing. Like I said it's just bubble wrap. Except it's shiny.
I'm thinking if it can be put up in the ceiling of a truck cab, it'll reduce the need for HVAC. Extend your non-idling season. It would be ugly as **** though.
Unroll it on top of the insulation in your attic, reduce air conditioning costs.
Because it's thin & lightweight, sew it between two bedsheets or blankets and make a super insulated (but noisy) blanket for sleeping in the truck in the winter months without a heater. Like if you've got an exhaust leak and no Airtronic heater.
There's lots of applications for it methinks.
Hell if you own a Husky or a Malamute, put it in the attic of it's dog house to help it stay cool in the summer.