Duck Pond Redneckery


generate.php
 
Go to the dictionary and look up "pain in the ass" and you'll see this:

20170202_211642.webp

But I already managed to get SEVEN 12 gauge solids through this thing:

20170202_212115.webp

It's feeding the air compressor switch which requires 4 wires, (two feeds, two loads returning to the box) an extra hot, common and ground so I can also have an outlet in this little stub wall, on a different circuit.

20170202_211801.webp
 
And pass through to the outlet exactly 18" from the floor. I'd prefer 12" but the damn electrical code says 18" for garages.

20170202_211750.webp

The light switches are fed by a different conduit.
 
Why don't you build a ramp like the Egyptians did when building a pyramid?
:stare1:

Definitely sounds like a possibility if I can't get it secured in the tractor bucket good enough.

I have a ramp long enough to get it about halfway up at a decent pitch.

Maybe use that to get it in the back of the Geezer's S-10 then use the ramp to get it the rest of the way up.

That's assuming I can strap it tight enough to the dolly. It will only be holding it by one leg on the bottom.
 
Go to the dictionary and look up "pain in the ass" and you'll see this:

View attachment 38492

But I already managed to get SEVEN 12 gauge solids through this thing:

View attachment 38493

It's feeding the air compressor switch which requires 4 wires, (two feeds, two loads returning to the box) an extra hot, common and ground so I can also have an outlet in this little stub wall, on a different circuit.

View attachment 38494
you know buddy, you say, "pain in the ass"..when frankly, you created it.

you gave us a "price update" mon the costs so far. not fully aware of your labor rates up there, i'd venture to guess, around an additional $500 would have paid for a professional electrician for his labor only (you supply the parts), and it would have all been done in one day, and with in code.

i applaud your efforts, but when i have read thru the zillions of posts about this project, many things could have been "farmed out" to pro's, and you could have slid into a more comfortable situation, sooner, rather than later.
 
you know buddy, you say, "pain in the ass"..when frankly, you created it.

you gave us a "price update" mon the costs so far. not fully aware of your labor rates up there, i'd venture to guess, around an additional $500 would have paid for a professional electrician for his labor only (you supply the parts), and it would have all been done in one day, and with in code.

i applaud your efforts, but when i have read thru the zillions of posts about this project, many things could have been "farmed out" to pro's, and you could have slid into a more comfortable situation, sooner, rather than later.
I like doing all that stuff myself. Even if I'm bitching the whole time. :D
 
you know buddy, you say, "pain in the ass"..when frankly, you created it.

you gave us a "price update" mon the costs so far. not fully aware of your labor rates up there, i'd venture to guess, around an additional $500 would have paid for a professional electrician for his labor only (you supply the parts), and it would have all been done in one day, and with in code.

i applaud your efforts, but when i have read thru the zillions of posts about this project, many things could have been "farmed out" to pro's, and you could have slid into a more comfortable situation, sooner, rather than later.
there is the "pride factor" to be taken into consideration in being to be able to do something yourself.
 
frankly, that's the way i am as well with some projects.

i just don't touch electrical, plumbing, framing, carpentry, masonry, window glazing, painting, wall papering, or refrigerator repairs....

everything else, i do....
I don't do ceilings, dig up sewer stuff, drywall.

I did an entire wall in a shed once in drywall. Taped and mudded, sanded it down and painted.

It was perfect.

Two weeks later there were cracks in every seam. :mad:

Turns out it was because the shed was built on cinder blocks.

But that was a hell of a lot of work and I was pissed off to the point I'm never going to do drywall again. It's why I didn't take & mud those two little scraps above the heater in the barn.
 
Last edited by a moderator:
I don't do ceilings, dig up sewer stuff, drywall.

I did an entire wall in a shed once in drywall. Taped and mudded, sanded it down and painted.

It was perfect.

Two weeks later there were cracks in every seam. :mad:

Turns out it was because the shed was built on cinder blocks.
i do plaster repairs. my house has the old horsehair plaster walls. i do ceilings and the walls.
 

Back
Top