Duck Pond Redneckery


No.

You don't need a vapor barrier with steel siding if it's insulated.
It’s vital to use a vapor barrier in conjunction with insulation, as it does just what the name implies. Most metal building insulation already comes with a vapor barrier over fiberglass batt. Plus, there are different types of vapor barriers, ranging from standard vinyl to vinyl reinforced with fiberglass strands to reinforced foil for even greater durability. Also, metal building insulation is now available with a white or black vapor barrier depending on your aesthetic requirements.

Tips to Prevent Condensation in Metal Buildings


It needs the barrier to keep the batting from getting damp.
 
Oh wait... I just realized that the insulation I'm using has vinyl moisture barrier on the inside of the paper backing. :bonk:

Doesn't matter if I need it anyway cuz it's going up.

Here's a scrap piece with the paper peeled away from it. The black stuff is vinyl vapor barrier. And the edges get overlapped, stapled then sandwiched between the plywood and the studs.

20161211_181513.webp
 
Condensation is prevented by the insulation. It's hard temperature differences on each side that causes it.

With insulation between the heated area and the steel, the steel is just as cold as the outside air. Aint gonna sweat.

I already looked into this before I started.
Oh wait... I just realized that the insulation I'm using has vinyl moisture barrier on the inside of the paper backing. :bonk:

Doesn't matter if I need it anyway cuz it's going up.

Here's a scrap piece with the paper peeled away from it. The black stuff is vinyl vapor barrier. And the edges get overlapped, stapled then sandwiched between the plywood and the studs.

View attachment 37755
Yeah, with that wall of your room sealed up against the outer wall, you'd be crazy not to have a barrier. That should do the trick.
 
Yeah, with that wall of your room sealed up against the outer wall, you'd be crazy not to have a barrier. That should do the trick.
I thought you were referring to tyvek between the steel and the wood to stop wind and rain.

Yeah the vinyl on the insulation stops what little moisture that gets through the plywood from getting to the insulation. And with the insulation between the heat and the steel, the steel stays cold and won't frost up.
 
Yeah, you could set that torpedo right up against that!
I poked a piece of conduit into a chunk of that mineral wool insulation and held it in front of that torpedo for about a minute.

It slowly turned black and smelled funny but didn't burn or make smoke.

I don't know what temperature that thing blows out but it's hot enough to turn steel orange.
 
he's drunk and the geezer is asleep:confused-96:

Uh, huh... :rolleyes:

I poked a piece of conduit into a chunk of that mineral wool insulation and held it in front of that torpedo for about a minute.

It slowly turned black and smelled funny but didn't burn or make smoke.

I don't know what temperature that thing blows out but it's hot enough to turn steel orange.

Which explains this... no adult supervision! ;)
 
Why isn't the exhaust pipe on?
Cuz I gotta shove the first part in from outside, then work on hanging the outside part.

Somehow... while it's snowing,...

:dunno:
All I do know is that stores close early on Sundays for no effin' reason. :mad:

I'd go get beer but I don't want to be slowed down by a hangover tomorrow.
 
Oh. Anyway you can hook up gas to see how it works?
Nope. There's no gas line going into the barn yet.

Hicksgas guy says furnace has to be 100% ready to go.

I gotta finish the exhaust then hook up a thermostat, then hook up the wires in the breaker box. They're just hanging out right now.

There's a 15 amp breaker labeled "spare". I put that outdoor flood light on it.

Thinking about using that circuit for the heater too. No idea if it needs to be on its own circuit. I know house furnaces do, because of the big fan motors.
 

Back
Top