Duck Pond Redneckery


It's 56 down in Daytona right now. I would have the heat on. Don't know about you but I sure do not like watching CNN and drinking coffee when it's 56 inside the house.
If you got that from Weatherbug it's probably 70 there in real life. :rolleyes:
 
Had some troop crawl into a lighting cart on the flightline one night trying to stay warm at Homestead AFB. Died of CO poisoning.

It gets dang cold down there... 35° with a 25 knot wind sucks.
 
Yeah I'm pretty serious now about venting this heater with 4" truck exhaust.

Might not be "code" but I've been told that building codes are a minimum requirement.

For example you can use black iron pipe as electrical conduit if you want.

How can I go wrong using 16 gauge steel instead 32 gauge beer can metal, and welding all the joints instead of relying on caulk or rubber O-rings?

Overkill,... For like 15% the cost. It's a win-win. :D
 
Had some troop crawl into a lighting cart on the flightline one night trying to stay warm at Homestead AFB. Died of CO poisoning.

It gets dang cold down there... 35° with a 25 knot wind sucks.
Same kind of guy who takes a nap in the intake cowl of a jet engine? o_O
 
HVAC is also a region thing.

There's probably only one air conditioner in the entire state of North Dakota and its probably located in an office that's inside a foundry or something.

Likewise the only heaters in Florida are probably in the shipping/receiving offices inside cold storage warehouses. :rolleyes:
what about the old farts you can bet that they have heaters:D
 


have you tried getting the parts at other places home depot lowes osh anyplace other than meynerds:confused-96:. hmm we suggested using a garden hose for the fuel line just use a damm dryer hose for the exhaust:stirpot:. and no don't really do it as i am being a smart ass:rolleyes:
 
Last edited:
You just like to work way too hard.
:rolleyes:

I just googled heat tape to figure out WTF you're talking about and found this:

Frost King Automatic Electric Heat Cable Kit - For Life Out Here

Interesting. I've been thinking of ways to make an insulated, heated cabinet for stuff like paint and caulk and stuff so I don't have to keep garage chemicals in the house.

Good place to store oil for my tractor too. It sucks trying to pour cold thick oil into a small tube in the winter.

Farm and Fleet has heated garden hoses, heated dog water bowls, both submersible and floating tank heaters, etc.

Thinking a submersible tank heater in a sealed 5 gallon bucket full of water set on the bottom shelf would do the trick.

I'd need a custom thermostat though. Something like a thermocouple or mercury switch inside the cabinet. Can't use a traditional bimetallic coil type in there because it'll make sparks.
 
Last edited by a moderator:


have you tried getting the parts at other places home depot lowes osh anyplace other than meynerds:confused-96:. hmm we suggested using a garden hose for the fuel line just use a damm dryer hose for the exhaust:stirpot:. and no don't really do it as i am being a smart ass:rolleyes:

I've watched so many of those kind of videos. None of them explain where to get furnace vent stuff that actually fucking fits together.

It's not just getting a straight pipe to connect to another one or an elbow. No, it's finding ALL the parts I need and having them actually fucking compatible with each other.

Right now it's figuring out what the fuck you're supposed to do where the pipe goes through the wall thimble. The ends are flared for the connections, so the hole is bigger than the tube. Big ass air leak.

And getting an "appliance adapter" that actually fits the furnace, for connecting the pipe to the furnace.

Might be easier to custom fabricate something out of 4" truck exhaust just for that connection than to do the entire thing that way.
 
I just googled heat tape to figure out WTF you're talking about and found this:

Frost King Automatic Electric Heat Cable Kit - For Life Out Here

Interesting. I've been thinking of ways to make an insulated, heated cabinet for stuff like paint and caulk and stuff so I don't have to keep garage chemicals in the house.

Good place to store oil for my tractor too. It sucks trying to pour cold thick oil into a small tube in the winter.

Farm and Fleet has heated garden hoses, heated dog water bowls, both submersible and floating tank heaters, etc.

Thinking a submersible tank heater in a sealed 5 gallon bucket full of water set on the bottom shelf would do the trick.

I'd need a custom thermostat though. Something like a thermocouple or mercury switch inside the cabinet. Can't use a traditional bimetallic coil type in there because it'll make sparks.
you didn't know what heat tape was:confused-96:. they use it alot on mobile home plumbing to keep it from freezing:stare1:. i would never keep chemicals in my house aka basement.. i like my garage detached from the house just for that reason
 
I've watched so many of those kind of videos. None of them explain where to get furnace vent stuff that actually ****ing fits together.

It's not just getting a straight pipe to connect to another one or an elbow. No, it's finding ALL the parts I need and having them actually ****ing compatible with each other.

Right now it's figuring out what the **** you're supposed to do where the pipe goes through the wall thimble. The ends are flared for the connections, so the hole is bigger than the tube. Big ass air leak.

And getting an "appliance adapter" that actually fits the furnace, for connecting the pipe to the furnace.

Might be easier to custom fabricate something out of 4" truck exhaust just for that connection than to do the entire thing that way.


https://www.google.com/webhp?source...v=2&ie=UTF-8#q=furnace+vent+for+sale&tbm=shop

let me know if any of this crap will work
 
Went to the Menard's in Joliet. Brought to the exhaust manifold from the heater.

On the left is the pipe adapter for a tankless water heater.

On the right is the exhaust manifold.

20161208_193730.webp

Perfect fit. So I'm going to use it.

20161208_193737.webp
 

Back
Top