Duck Pond Redneckery


id'e call a professional like he was gonna do in an earlier post. if he thinks doing it himself is expensive have the grease out when you call a professional it will be costly then
Did you miss the part where I said I've called three Heating and Air places and they don't want the job or say they're booked up until infinity?
 
No its not.

Because none of the parts at ****ing Menard's fit together.

The 4" class 3 single wall stainless pipe won't even fit in the wall thimble made for 4" class 3 single wall stainless pipe. The hole is like 5" diameter for a 4" pipe.

Who the **** designs this stuff?
Maybe there's a reason they literally sell duct sealant in 5 gallon buckets.

I've tried getting three different HVAC companies to do it and none of them want the job. If they even answer their ****ing phone, as soon as they hear it's a partially completed installation, all of a sudden they're booked up til March or they don't do partial installations because blah blah blah.. .

I even cussed one of them out because I don't ****ing pay people to do something I can do myself.

So I don't know what to do besides go get some ****ing truck exhaust pipe and ****ing weld it to the God damn piece on the furnace, weld it to the ****ing thimble, weld the 90 on it and weld up my own ****ing termination tee because at least then I know it'll ****ing go together and not leak.

Seriously I would like to find out who designs this duct stuff and beat him to death with a hammer. I want to see brains splattered all over the ground.
why in the hell would maynerds carry a freaking heater and not the right parts to fit it makes no freaking sense to me:confused-96:. if you could do it yourself you wouldn't be on here bitchin:stare1:. the reason the HVAC people don't want the job is it's partially completed wich is a liability issue incase something happens like your man cave burns to the ground:mad:. and don't forget it's all made in china crapola today
 
Did you miss the part where I said I've called three Heating and Air places and they don't want the job or say they're booked up until infinity?
no i didn't did you miss the post where i told you they don't want the job because it maybe a liability issue :confused-96:
 
at this point id'e be taking the freaking thing back and dropping in a wood stove if i had the trees to cut down to burn
:bonk:

Um,... Hello... The problem here is not the gas connection, not the mounting, not the electrical wiring, it's the exhaust flue.

How would getting a wood stove get around that problem? :confused:
 
I'm just pissed because too many so-called "engineers" managed to take something as simple as sheet metal tubes and create an impossible mess that doesn't fit together.

It's got to be a conspiracy to keep HVAC companies in business. They bribe the big box retailers into selling a bunch of incompatible crap so people give up and pay 3 times what it should cost to have a "professional" come and snap the REAL stuff together in 5 minutes.
 
It is Menard's after all... not Joes Professional HVAC Supply.

:whip:

Ever notice the torch and ample supply of solder, flux and sheet metal on a HVAC truck?

:D
 
I'm just pissed because too many so-called "engineers" managed to take something as simple as sheet metal tubes and create an impossible mess that doesn't fit together.have you asked anyone at maynerds that could finish the job:confused-96:

It's got to be a conspiracy to keep HVAC companies in business. They bribe the big box retailers into selling a bunch of incompatible crap so people give up and pay 3 times what it should cost to have a "professional" come and snap the REAL stuff together in 5 minutes.
It is Menard's after all... not Joes Professional HVAC Supply.

:whip:

Ever notice the torch and ample supply of solder, flux and sheet metal on a HVAC truck?

:D
This is an example of some of bullshit that one can go through
It is Menard's after all... not Joes Professional HVAC Supply.

:whip:

Ever notice the torch and ample supply of solder, flux and sheet metal on a HVAC truck?

:D
He wants to talk about a conspiracy to keep the hvac companies in business some won't install unless you buy off of them also
 
It is Menard's after all... not Joes Professional HVAC Supply.

:whip:

Ever notice the torch and ample supply of solder, flux and sheet metal on a HVAC truck?

:D
Never actually seen an HVAC truck. Never paid attention actually.

The guy who installed the boiler showed up in a van and I didn't go poking around.

The exhaust for the boiler is PVC. :stare1:

Wouldn't surprise me at all if they simply butt two pieces together and clamp a band around it with two hose clamps and some sealant, or use flare tools like muffler shops.

Because if they had to work with what they sell at Menard's they'd be as homicidal as I am. Except every day. :stare1:
 
HVAC people don't need much. All their tools which isn't much fits in a van. They order units which are shipped to the customer and cranes put them in place. We have a young kid at work who's been going to school 3 nights a week. I think it's 18 months long. He's only like 25. He will do very well in life for sure.
 
Never actually seen an HVAC truck. Never paid attention actually.

The guy who installed the boiler showed up in a van and I didn't go poking around.

The exhaust for the boiler is PVC. :stare1:

Wouldn't surprise me at all if they simply butt two pieces together and clamp a band around it with two hose clamps and some sealant, or use flare tools like muffler shops.

Because if they had to work with what they sell at Menard's they'd be as homicidal as I am. Except every day. :stare1:

One day in the trenches, amongst much gnashin' of th' teeth an' cussin' my boss told me, "that's why you make the big bucks."

If it was easy, they wouldn't need HVAC techs.

o_O
 
I don't know about around here but in Tennessee the HVAC business is locked out just like it is up here with the electrical business.

The unions lock everyone out here because it's not a "right to work" state. To get a job as an electrician you need to know someone or you sit on a waiting list at the union hall for 50 years. It was like that even in the 1990's during the housing boom.

My cousin in Nashville went to the HVAC school only to find out that in all of central TN you can't get an HVAC job unless you know someone or your family owns the business. I don't know if it's unions locking everyone out or just an overabundance of "supply" in that labor market (like the ATA is trying to create in ours with this fake "driver shortage" myth). But I do know that TN is a right to work state, or was in 2005.
 
Last edited by a moderator:
This school the kid is going to tell him to just head down to Florida. They have companies calling the school all the time asking for grads to come down. He plans to work for a company for a little while and jump right into his own business. The school started out with 18 people. They are down to 8. You have to pay up front. $30,000!!!!! Most of the drop outs were from a state funded program.
 
This is kind of weird but now it makes sense. They all started out learning how to fix a washing machine, then a microwave then a dryer. I realize now it was to teach them the basics of electronics.
 
HVAC is also a region thing.

There's probably only one air conditioner in the entire state of North Dakota and its probably located in an office that's inside a foundry or something.

Likewise the only heaters in Florida are probably in the shipping/receiving offices inside cold storage warehouses. :rolleyes:
 
You kidding!!! I can assure you every heater in every house is on every morning and night in Florida. It gets to 70 and on they go.
 
It's 56 down in Daytona right now. I would have the heat on. Don't know about you but I sure do not like watching CNN and drinking coffee when it's 56 inside the house.
 

Back
Top