Duck Pond Redneckery


How to balance a ceiling fan.

They all come with little stick-on weights that don't make a difference no matter where you put them.

I was screwing around with a washer and a little piece of duct tape and noticed they didn't all seem to be the same pitch.

So I bent the little blade holder things near the hub til they were all 15 degrees.

20161223_221957.webp

That took about 75% of the wobble out.

One blade was 20° and one of the two across from it was 10°. The others were 15°.

The 20° blade was making more lift and causing the wobble.
 
Last edited by a moderator:
20161224_125330.webp

I was right.

After running it about 20-30 hours, always just "on" except for when I shut it down at night, there was only about a teaspoon of water in it.

Last night I left it set at 50° so it was periodically cycling on and off.

I predicted it would only produce condensation when the flue is cooling down between cycles.

I just came in here and the trap was full.

No idea what that black stuff is though. :dunno:
 
I'm never buying this Liquid Nails brand of caulk again.

20161224_130320.webp

This is why.

It's been about 20 minutes since I removed this from the gun and it's still oozing out.

20161224_130313.webp

I can't use it. I can caulk a bead but even after I release the pressure on the piston in the caulk gun it keeps coming out at the same rate as when I'm running a bead. This makes it way too messy to work with. :mad:
 

Back
Top