Duck Pond Redneckery


After 8 years in the east barn, full of kerosene all I had to do was dump out the old fuel, vacuum out the mice nests (hood thing I took the top off before even testing the fan) and replace the dry rotted fuel lines. It fired right up.

125,000 BTU.

20161113_160412.webp

My dad shined it up like new while I was out getting kerosene.

F***ing 5 dollars a gallon at the truck stop in Manteno :mad:
 
After 8 years in the east barn, full of kerosene all I had to do was dump out the old fuel, vacuum out the mice nests (hood thing I took the top off before even testing the fan) and replace the dry rotted fuel lines. It fired right up.

125,000 BTU.

View attachment 37362

My dad shined it up like new while I was out getting kerosene.

F***ing 5 dollars a gallon at the truck stop in Manteno :mad:
do you have home heating oil companies near you.>??

many do carry K-1 as well, with a pump on the property, this is where i'd get my K-1
 
This thing was my grandpa's.

20161115_155929.webp

It's not compound. It can miter (rotate on vertical axis) but not bevel (tilt on horizontal axis).

It's cross-cut ability is just shy of 5 inches. Therefore it takes two attempts to get through a 2x6.

To greatly speed up the process of framing out 2x6 exterior walls, I convinced my dad we needed this:

20161115_155956.webp

It's a compound sliding miter saw. Because of the sliding action, it's cross-cut ability is 12".

Ok,... that was yesterday.

My dad just came in here and bitched because I was using my handheld circular saw to cut plywood.

:bonk:

Example, that strip closing off the top shelf here. . . . that's 12" by 98-3/4". That's what I was using the circular saw for. :rolleyes:

20161114_215249.webp

Last night I was up on that top rack trying to get an 8 foot 2x2 furring strip to lie flat along the front edge of the shelf to have something to screw the plywood to at the bottom.

It wouldn't fit so I handed it down to him and told him to trim about a blade width off of one end.

He walked over to the table saw instead of the miter saw. o_O


The man has TWO bachelor's degrees and a PhD. :stare1:
 
After 8 years in the east barn, full of kerosene all I had to do was dump out the old fuel, vacuum out the mice nests (hood thing I took the top off before even testing the fan) and replace the dry rotted fuel lines. It fired right up.

125,000 BTU.

View attachment 37362

My dad shined it up like new while I was out getting kerosene.

F***ing 5 dollars a gallon at the truck stop in Manteno :mad:
125,000 BTU's British Thermal Units? What does that work out to in American?
 
Is that your bedroom closed off at the top?
That's the doghouse. :toothpick:

For when Mrs Duck is crabby. :D


Actually I don't know what to do with that space. Making a sleeper berth up there is certainly a possibility but I think it'll end up too narrow because of the insulation. And I certainly don't want to sleep next to fiberglass insulation unless there's an airtight barrier around it. I'm all itchy just from crawling around up there today.
 

Back
Top