Electric Chicken
Well-Known Member
40k or better they can have it back and I'll go company again.
EC's Going For It
Electric Chicken
Well-Known Member
Got one out. The other is hella stubborn. Next to a 3lb hammer for scale.
Electric Chicken
Well-Known Member
It wasn't super difficult but it took my air hammer to rotate it then wedge it out and rotate it back and forth several times to make it move freely. That got it out by about an inch. Then to finish removing it I drew it out with the come along and chain using the day cab as an anchor. It didn't go flying. I had to tap it with a hammer and keep adjusting the tension on the puller then it finally dropped.
These photos are it hooked to the stubborn side. I haven't gotten it to move freely but thought I'd try anyway since I was set up already. I did manage to get it to rotate slightly away from the threaded holes but not much. There's still hope though.
These photos are it hooked to the stubborn side. I haven't gotten it to move freely but thought I'd try anyway since I was set up already. I did manage to get it to rotate slightly away from the threaded holes but not much. There's still hope though.
Similar threads
