Duck
Sarcastic remark goes here
He said he was squatting in a ditch & poking berries up his nose.Now im curious what did you say,lol
He said he was squatting in a ditch & poking berries up his nose.Now im curious what did you say,lol


Getting back to the solar panels...
I put a meter on one of the worst panels.
It tested within a volt of an undamaged panel that I disconnected from my array.

I am in no state of mind to address this right now ( https://www.truckersforum.net/forum/threads/i-think-i-just-got-struck-by-lightning.87612/) but it's simple physics regarding draft. Geometry looking at the cross section of a pontoon vs a flat plane.Getting back to the solar panels...
I put a meter on one of the worst panels.
It tested within a volt of an undamaged panel that I disconnected from my array.
If you bolted 2 or 3 panels to 4" pontoons fashioned from PVC conduit, would that hold the weight at about 40 pounds per panel?
[Conduit is UV resistant unlike regular PVC pipe.]
And, BTW...
I'm sure you've researched raft construction since you started on your first one but why wouldn't plywood secured to 4" or 6" PVC conduit pontoons allow less draft than a full sheet of polystyrene on the surface.
Seems to me that you could estimate the displacement and achieve everything from empty to maximum payload within a coupla inches of the surface.
You could even fill them with foam if you were concerned about a breach.
Why wouldn't pontoons reduce the draft and provide better locomotion, even if the polystyrene remained in place and skipped across the surface under full load?
You could even notch out a transom at the stern and use a squirrel cage fan for a paddle wheel.
I know a coupla back ways in to the FEMA food stash but once the zombie apocalypse hits, we may need a submarine to get across the river undetected.
@Sinister will be the designated spelunker if that's alright with you.
![]()
Wrong. I was 100% sober when I walked into the metal barn during a lightning storm.This drunk guy walks into a metal barn during a lightning storm.......

This drunk guy walks into a metal barn during a lightning storm.......


wonders if it had a lightning rod to top it all off


Given the fact you have so many trees on your property, were you holding the damaged panel up right beside the one on your array so they're getting the exact same sun exposure?Getting back to the solar panels...
I put a meter on one of the worst panels.
It tested within a volt of an undamaged panel that I disconnected from my array.
Probably. You gotta figure out the volume of the PVC tube, convert to cubic feet, multiply by 62.5 then subtract the weight of the panels and the tube itself.If you bolted 2 or 3 panels to 4" pontoons fashioned from PVC conduit, would that hold the weight at about 40 pounds per panel?
What's going to make deeper ruts in the mud? Skinny tires or big wide balloon tires?I'm sure you've researched raft construction since you started on your first one but why wouldn't plywood secured to 4" or 6" PVC conduit pontoons allow less draft than a full sheet of polystyrene on the surface.
Seems to me that you could estimate the displacement and achieve everything from empty to maximum payload within a coupla inches of the surface.
)Better add a couple more for the beer belly factor!So... by waving a magic wand provided by Sir Issac, otherwise known as calculus, it's actually rather easy to figure, even though I was lazy and used WolframAlpha rather than get my calc skills going again.
A 9' cylinder of 4" diameter would displace 130 lbs @ 2" of draft, or 90lbs @ 1" of draft. So it would probably take 6 pontoons to equal your styrofoam sheet: 5 to provide the same bouyancy, and the 6th would account for the weight of the pontoons. Based solely on a WAG on their weight, of course.

Solar panels have beer bellies?Better add a couple more for the beer belly factor!
![]()

Y'all gonna just let 'em float out there when something breaks? Better plug in some boyancy fer them beer bellies when y'all step on board with the tool box.Solar panels have beer bellies?
Pay attention. @Blood is talking about just making a bare minimum raft to float the solar panels behind the raft until I get to the campsite or until I get under the low clearance at the state line, then unfold some kind of framework that'll hold them overhead as an awning.
I don't anticipate having to get on top of them. They're solar panels. The wiring and stuff would be on one edge I think.Y'all gonna just let 'em float out there when something breaks? Better plug in some boyancy fer them beer bellies when y'all step on board with the tool box.

Funny thing is, when the raft isn't loaded up like the Beverly Hillbillies with camping gear, I actually like it when the jet ski ass holes try to send waves of water over the top of my raft.Jet-skis do get more than their share of douchebags. I keep looking for the IROC-Z sticker hidden on them somewhere.

