Duck Pond Redneckery


Has the little prinks ever hear'd of 'noodling'?
:)

images
 
13754471_10205343075011289_8099024811800876152_n.jpg


I lost track of how many times we walked right into the side of this camouflage tent because we couldn't see it. Birds kept hitting it too.

13729167_10205343576503826_7395059532567080630_n.jpg


All that crap and nothing fell off. Nobody fell off either.

Two marine batteries, stereo, cooler, 3 chairs, 3 lanterns, camp stove, griddle, bags containing food, silverware, plastic bowls & plates, 3 oars, the keep-stuff-dry box, phones, tent, sleeping bags, pillows, .... nothing fell off.

Hey @Sinister... :stirpot2:
 
13754471_10205343075011289_8099024811800876152_n.jpg


I lost track of how many times we walked right into the side of this camouflage tent because we couldn't see it. Birds kept hitting it too.

13729167_10205343576503826_7395059532567080630_n.jpg


All that crap and nothing fell off. Nobody fell off either.

Two marine batteries, stereo, cooler, 3 chairs, 3 lanterns, camp stove, griddle, bags containing food, silverware, plastic bowls & plates, 3 oars, the keep-stuff-dry box, phones, tent, sleeping bags, pillows, .... nothing fell off.

Hey @Sinister... :stirpot2:
Good morning duck,howcome everything is on that boat?
 
If anything is redneck it's that photo,lol
Yep. Redneckery.

Let's take a look at the math and science here.

Here's a picture my dad took from shore as we were arriving at the public access boat ramp in Momence. It looks like we were close to sinking but we could've put another 600 lbs on it.

2016-07-17 16.05.05.webp

I'm not kidding either.

There are three sheets of 2" thick polystyrene insulation under each raft.

That water isn't muddy, it's sandy because Indiana channelized the river but it reverts to its natural course at the state line. This dumps tons of sediment (sand) in Illinois, creating all the sand bars and beaches. The tree huggers hate it for some reason but I like it. Everybody likes to camp and hang out on beaches.

So it's heavier by volume than clear water.

Well clear water is 62.4 lbs per cubic foot.

Screenshot_2016-07-17-16-20-44.webp

4×8×0.5 = 16 cu ft of Styrofoam per raft. That's two rafts so it's 32 ft³.

So what you see in the picture would be displacing 1,997 lbs of water by the time it sinks due to overloading. And the only way to sink styrofoam is to pin it down with weight, burn or dissolve it with chemicals.

But it looks like only one sheet per raft was above the water line. I don't remember if we were leaning either way but the way Brian loaded everything, if I wasn't leaning back in my chair we would be leaning towards the left a bit.

So IF we weren't leaning at that moment, 1,997 minus one third (665.6) = 1331 lbs gross weight in that picture. (At least that much because the displaced water was sandy & therefore heavier by volume than clear water).

On Styrofoam. Same stuff disposable styrofoam drink cups are made of.

And as I said, and have been saying since 1998 when I first built rafts like this, in spite of the Titanic curse, it's virtually unsinkable.

We could get run over by a motorboat, pass out drunk and fall off, etc. A lot of stuff that could happen with any watercraft that size could happen, but it aint gonna sink.

So take almost a ton of crap, in water any depth over 6" (we were drafting 4 inches in that pic) and only a major gasoline spill (like thousands of gallons floating on the surface) can sink it...

And it's incredibly stable too. I was purposely letting motorboat wakes hit us broadside because the boys liked the ride. The waves don't crash over the side. The raft rides over the top of them, clinging to the surface like it's glued.

Huge payloads in shallow (or deep) water, won't sink, extremely stable. Safest watercraft I've ever been on.

Yep. Pure redneckery. ;)
 
I haven't read back on your thread but I see you posted alot of photos,are you in any of them?I take it you were on vacation? No wonder it's been quiet here, lol.Looks like you all had a fun time.
 
so now WTF are you blowing up or burning down:D
Just something to power the raft stereo when it's in the barn.

It apparently draws more than 6 amps if I crank it loud because the stereo cuts out just like when you turn off the ignition in a car then turn it back on.

But it's good enough for me cuz I don't crank it loud in the shop anyway.
 
Unfortunately the raft stereo is kinda heavy because of the plywood & four 6x9's.

But I made lemonade. ;)

That weight makes it stable enough to hold a pretty tall lantern pole.

6.webp

The pole is removable:

1.webp

4.webp

5.webp

A strong miter cut joint allows it to have no curve or gussets at the top so it fits perfectly in the corner of a raft, taking up no space.

Plenty strong enough to hold a lantern anyway.

7.webp

In keeping with the "not taking up any space" thing I didn't want a hook so I made a hemispherical cutout for the lantern handle to set in.

3.webp

That was a pain in the ass & took the most time. It was more like sculpture than fabricating, although it's electrical conduit so I kept grinding holes in it & having to add more metal with the torch.
 

Back
Top