Duck Pond Redneckery


Not wanting to waste the energy invested in maintaining 67° in there all day, after I turned the heat down to 50° for the night I kept working til it got cold.

Here's how you hang continuous strip of insulation from top to bottom with cross pieces in the way. :D

20161227_014948.webp

Just slice the fluffy stuff with scissors, peel it away from the vapor barrier and tuck it over the whatchamahoogie. :thumbsup:

And I put up the easiest piece of OSB.

20161227_024202.webp

The upper part because of that window, can be one sheet hung sideways.

No idea how I'll get it up there though. Maybe use the scaffold.
 
Here's some actual redneckery.

I had to disconnect the PVC flue pipe from the boiler in the house and suck out a dead bird with the shop vac. :mad:

The galvanized screen the installer put over the end outside rusted out.

Menard's ain't got nothing....

But this thing is made for sink vents on a roof.

Low air flow. It would be way too restrictive for the boiler flue.

So I went one size larger. Boiler flue is 3". This is for 4".

And drilled a million holes in the end and right now I'm removing half of the side thingies.

20161227_143440.webp

20161227_143502.webp
 
Here's some actual redneckery.

I had to disconnect the PVC flue pipe from the boiler in the house and suck out a dead bird with the shop vac. :mad:

The galvanized screen the installer put over the end outside rusted out.

Menard's ain't got nothing....

But this thing is made for sink vents on a roof.

Low air flow. It would be way too restrictive for the boiler flue.

So I went one size larger. Boiler flue is 3". This is for 4".

And drilled a million holes in the end and right now I'm removing half of the side thingies.

View attachment 37948

View attachment 37949
nearly the same thing is sold in the area the store sell downspouts. they have a "leaf catcher" that fits into the downspout, plastic.

leaf-catcher-04.jpg


049821290597.jpg




https://www.menards.com/main/buildi...gutters/gutters/gutter-accessories/c-5812.htm
 
Well I'm done for a day or two. F*ing band-aids won't stay on and I can't get anything done one-handed. :mad:

20161228_194327.webp

20161228_194000~2.webp

For some reason the bedroom door had a frosted glass window in it and Sarah was crabby and slammed the door and it broke.

That was a few days ago. I cleaned up the glass and put it in the garbage can.

Yesterday I pulled the bag out of the trash can and forgot it was full of broken glass. :mad:

But I put a large "scraped knee" type bandage on it and kept working in the barn for a few hours.

No idea why but today the same band-aids won't stay on.

I thought about just wearing a glove but I don't have any that would be sanitary enough for a wide open gash that hasn't scabbed over yet. Even brand new, they're probably full of germs from the sweat shop employees in Crappistanesia.
 
Well I'm done for a day or two. F*ing band-aids won't stay on and I can't get anything done one-handed. :mad:

View attachment 37977

View attachment 37978

For some reason the bedroom door had a frosted glass window in it and Sarah was crabby and slammed the door and it broke.

That was a few days ago. I cleaned up the glass and put it in the garbage can.

Yesterday I pulled the bag out of the trash can and forgot it was full of broken glass. :mad:

But I put a large "scraped knee" type bandage on it and kept working in the barn for a few hours.

No idea why but today the same band-aids won't stay on.

I thought about just wearing a glove but I don't have any that would be sanitary enough for a wide open gash that hasn't scabbed over yet. Even brand new, they're probably full of germs from the sweat shop employees in Crappistanesia.
Oh I bet you could get things done with one hand there big boy! LOL:biglaugh:
 
Oh I bet you could get things done with one hand there big boy! LOL:biglaugh:
Well I swept the floor, moved three tool boxes and my hydraulic press, and relocated a pile of steel stock.

That small amount of activity was enough to make the palm of my hand get just sweaty enough for the bandaid to fall off.

I moved all that steel with one hand because most of it is rusty and I haven't had a tetanus shot in 20 years.
 
Well I swept the floor, moved three tool boxes and my hydraulic press, and relocated a pile of steel stock.

That small amount of activity was enough to make the palm of my hand get just sweaty enough for the bandaid to fall off.

I moved all that steel with one hand because most of it is rusty and I haven't had a tetanus shot in 20 years.
Well this sucks! I was expecting an insulting retort. How embarrassing for me :oops:
 

Back
Top