EC's Going For It


Yep indeed they did. Also had to replace the drain valves on the air tanks. One was leaking and the others were broken off.

Stupid little shit I didn't notice and wouldn't have been a deal breaker anyway, but probably could have gotten them to replace if I did.

What sucks though is Mack decided to change the threads in the tanks so the 1/4" NPT ones I already had don't fit. They're M12-1.5 now. Stupid.

Also the truck has a Doran (expensive) TPMS installed but the sensors are dying off one by one, so I deprogrammed all of them. I might replace the sensors later so for now I just wanted it to not beep at me. If they didn't have an antenna wired in somewhere I'd just yank it out but for now this is easier.
 
Got my air lines swapped over. I hate those coiled ones.

Apparently this truck also has a suspension air gauge. I'll have to scale it at different weights to see how the PSI changes but that'll be a useful feature.

Found a menu option to set target fuel economy. I put it somewhere around 7. I'm not sure how that'll work in the real world but if it changes behavior accordingly to save fuel I'm all about it. Should be more nuanced than simply putting the transmission in econ vs performance mode.
 
Got most of the fuel transferred over from the green to the white. It was damn near full so I didn't want to give it away to the insurance company.

I probably scavenged about 120-130 gallons if I had to guess. Now it'll be less salty to top off before getting my CAT ticket.
 
Tossed the dashcam in the truck then went for fuel and a CAT ticket.

Maybe I'm just inexperienced with sleepers but it seemed kinda heavy to me at just over 20k.

Has the APU and ~250 gallons of fuel in it but still. It's not loaded with personal effects yet.
 
Tossed the dashcam in the truck then went for fuel and a CAT ticket.

Maybe I'm just inexperienced with sleepers but it seemed kinda heavy to me at just over 20k.

Has the APU and ~250 gallons of fuel in it but still. It's not loaded with personal effects yet.
That does sound kind of heavy for a new truck. The highway trucks I have driven were between 16-18K but no APU.
 
My 389 daycab was 17,500 full of fuel with no apu, me or personal effects. Mack is a heavy truck to start with, not like a shaker with paper thin body panels and frame. My 379 with a TransCraft Eagle skateboard was 29,xxx. The trailer was light, but it also had a C-16 sitting on the front axle.
 
My 389 daycab was 17,500 full of fuel with no apu, me or personal effects. Mack is a heavy truck to start with, not like a shaker with paper thin body panels and frame. My 379 with a TransCraft Eagle skateboard was 29,xxx. The trailer was light, but it also had a C-16 sitting on the front axle.
That's a good point. You can feel that it's more truck than a Cascadia. Little bit Western Star-ish minus the wood cabinets.
 
You don't need fancy, you need functional in what you plan to use it for. Fancy is fine if you plan on living in it. You'll have to dust off the sheets for the few times you will be using that bunk. But that extra room sure is nice to have.
 
Found an air leak in the secondary air tank main line. Thought it was 1/2" at first glance and went out with a fitting thinking no problem. It's 5/8 so I had to order some.

Explains why I lost most of my secondary while I was transferring the fuel.

20250903_134340.webp
 
2 minutes after the union arrived I had it on the truck and so far it appears that fixed it all up. Air pressure didn't drop after about 5 minutes then I got bored staring at the gauges and went inside.

I'll check it again later to see where it's at.

It down poured right after I went inside to look for my bigger zip ties so I didn't get to do that part yet. I will zip the lines together so they can't rub anymore. More to protect the main compressor line at this point since the union is what's against it now, so that secondary tubing is fine for the long term.
 

Back
Top