EC's Going For It


About halfway in the train, it looked like there was a pusher locomotive in there. Is that common up in the hill country?
Excellent audio and video considering the sources. Surveillance drones have come a long way in a short time.

I'd love that train horn on my Cadillac to wake the idiots up that have to almost sideswipe you while taking pix or vids on the car while I'm driving it.
I noticed that too. In the video.
The first time I noticed it IRL was a train coming from out west (pretty hilly) CPKC with a power unit in the middle. I live near a CN yard and I mostly see trains headed east to Montreal (pretty flat) and they just have three power units up front.
So I think you're right, The power unit in the middle must be for mountainous regions.
 
I've seen many trains with one or more pushers in the middle and on the end. Not only do they help with getting all that weight up to the top, but they also help hold it back on the way down.

Here I see 2 mile long aggregate trains that have 3 locomotives up front and two in the very rear. They also utilize a fuel tank car at each end. Each rail car grosses 200,000 pounds.
 
That Mack yard is pretty cool, that's where the "shunt" separate train cars and sort them into new trains. There is constant banging there from cars slamming into each other.
You can see single cars traveling on their own. They uncouple cars and then send them downhill to couple with other cars on the appropriate track. Someone works the switches. They have underground tunnels for the groundmen to walk under the tracks and go from track to track.

I am sure there is a video out there of it from one of these "Trainiacs". I will look for it later.
 
I asked AI what a slug was in railroad terms:

A slug is a type of rail unit that lacks a prime mover and derives its power from a connected locomotive, known as the "mother." It is used to increase traction and improve performance, especially at low speeds, without the cost of a full locomotive. Wikipedia american-rails.com

Definition of a Slug​

A slug is a type of rail vehicle that operates as part of a diesel-electric locomotive system. It does not have its own prime mover, meaning it cannot operate independently. Instead, it derives electrical power from a "mother" locomotive, which is fully powered.

Purpose and Function​

Slugs are designed to enhance tractive effort and increase adhesion, especially at low speeds. They are particularly useful in situations where a locomotive's traction motors may struggle to handle the full power of the engine, such as during switching operations in rail yards.

Types of Slugs​

TypeDescription
Yard SlugBuilt for switching, with a low body for better visibility. Often used in yard operations.
Hump SlugDesigned for pushing cars over a hump at very low speeds (2-3 mph).
Road SlugUsed in regular road service, retains some features of powered locomotives but lacks a prime mover.

Historical Context​

The concept of slugs began in the 1940s, primarily for yard service. Over the years, railroads have repurposed older locomotives into slugs, allowing for efficient use of resources and improved performance in low-speed operations.
 
Yesterday finally got in touch with the right people to file my own claim for my truck repairs. All this time I had no such information and assumed it was the same policy. It's not. So that's started and they said I should hear from the adjuster by the 20th.

Also it was tougher to get in touch with the sales people at the dealer for whatever reason. Arranged to go down Monday to look at these two trucks they have.

They also reduced the prices on both by $3,000 in the meantime so that's a plus. I'll be well under my loan limit.

There are less expensive, nicer looking ones down south like in NC so if neither of these check out I might start doing some traveling. But I'll make an itinerary before I go anywhere so I can see a bunch of them in the same trip. Not that I have a burning desire to do so.
 
Just got home from checking out the Macks.

I decided to purchase the lower mileage one. It's not flawless but it seemed to drive great (by my standards anyway just bobtailing). It was butter smooth and felt plenty peppy. I was up to 68mph on I-81 in Maryland before I noticed it.

APU works, nothing rattles, oil looked clean, didn't see any leaks.

It'll get detailed and have a new mattress put in.

Had inactive codes when I scanned it but they were all 2022 and older. Inactive codes aren't really a big deal. These modern trucks get upset all the time. It's when they become active and persistent that you have a real problem.

Also it has a bull bar and disk brakes all around.

50 grand is only 3 grand more than that 2016 Western Star I regret not buying years ago, so the penalty of time isn't that bad, inflation wise.

20250818_095914.webp
 
Just got home from checking out the Macks.

I decided to purchase the lower mileage one. It's not flawless but it seemed to drive great (by my standards anyway just bobtailing). It was butter smooth and felt plenty peppy. I was up to 68mph on I-81 in Maryland before I noticed it.

APU works, nothing rattles, oil looked clean, didn't see any leaks.

It'll get detailed and have a new mattress put in.

Had inactive codes when I scanned it but they were all 2022 and older. Inactive codes aren't really a big deal. These modern trucks get upset all the time. It's when they become active and persistent that you have a real problem.

Also it has a bull bar and disk brakes all around.

50 grand is only 3 grand more than that 2016 Western Star I regret not buying years ago, so the penalty of time isn't that bad, inflation wise.

View attachment 91208
A nice green pinstripe in memory of the old Mack?
 
My insurance finally got back to me today. Couple emails exchanged and they're okay with me having the original owner dealer/body shop come and give me an estimate instead of sending out one of their adjusters.

And they issued a refund for my tow already.

So far the most painful part was finding out I needed to call them in the first place.

On the flip side, it's probably a good thing to have these delays because if my truck was fixed already I'd be back in the same wish-I-had-a-sleeper-instead boat as I was before.
 
Last edited:
Add a little bling and your polished wheels and it will look totally different.
I'm sure I'll be swapping different stuff. Everything that's newer and fits basically.

Probably even the air bags since they're basically brand new vs 4 years old.

Looking forward to getting this thing and putting it on the road. As smooth as it was bobtail I can't imagine it being worse with a load on.
 

Back
Top