1999 KW W900 Fuse Panel layout schematic?

[Hanadarko]

Any chance anyone out there has a fuse panel layout diagram?
Much of my fuse panel isn't labeled - or just says ACC or BATT and then the AMP size.

I have NO power to my BLUE (Center) wire on my tractor outlet towards the trailer and trying to figure out why.
Due to this, my trailer ABS is dead right now....

:eek2:

 

[Duck]

Any chance anyone out there has a fuse panel layout diagram?
Much of my fuse panel isn't labeled - or just says ACC or BATT and then the AMP size.

I have NO power to my BLUE (Center) wire on my tractor outlet towards the trailer and trying to figure out why.
Due to this, my trailer ABS is dead right now....

:eek2:

With no labels on the fuse panel, I'd just pull them all out one by one and look at them to see if they're popped.

 

[Hanadarko]

Got it

With no labels on the fuse panel, I'd just pull them all out one by one and look at them to see if they're popped.

Turns out there are (4) weather tight fuse holders next to the firewall (within the engine compartment) and they have automotive style blade fuses in them.

The one feeding the blue wire was blown.

View attachment 6464
View attachment 6464

 

[Tim]

Turns out there are (4) weather tight fuse holders next to the firewall (within the engine compartment) and they have automotive style blade fuses in them.

The one feeding the blue wire was blown.

View attachment 6464

If I remember right all those wires and fuses are for the function of your trailer.

 

[nhatkhai]

Got it




Turns out there are (4) weather tight fuse holders next to the firewall (within the engine compartment) and they have automotive style blade fuses in them.

The one feeding the blue wire was blown.

View attachment 6464
View attachment 6464

Could you repost the pics? Not showing up

 

[389 Hood]

This thread is 10 years old now. Those pictures have been long removed.

 

[nhatkhai]

This thread is 10 years old now. Those pictures have been long removed.

Yeppp, Seen that, but still had to ask just in case. I know the fuse block with the relays but the wires have lost color, I'm just going to run continuity to locate. They are not blown, no power at all. Most likely I will just run a jumper for the time being and when time permits do a deep dig in.