DD13 - No Oil Pressure

deanwoda

New Member
I have a 2015 114SD with A DD13 engine.
I have followed all the steps and still have no oil pressure. Just started all of a sudden. Replaced oring, pump, filter and oil pull the pressure switch out nothing out of the hole.
Anyone have this problem with there truck and get it fixed.
I have been to a Detroit shop and they are puzzled saying they have not seen this happen.
Any help would be appreciated.
Thanks
 
The two tube that run inside the oil pan have o rings on each end. Either the tubes have cracked or the orings on either end of them are allowing the pump to suck air. Detroit has put out a service bulletin on it.
 
The two tube that run inside the oil pan have o rings on each end. Either the tubes have cracked or the orings on either end of them are allowing the pump to suck air. Detroit has put out a service bulletin on it.
I have replaced the o-rings and inspected the tube and pick assy.
I have oil to the oil filter but no pressure
 
I have manually tested and replaced oil pump sending unit O-rings, inspected tubes for cracks, inspected oil pick up manifold for cracks, replaced oil and filter, checked play in bearings. I can take the oil pressure switch out and no oil comes out of it with truck running.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Users who are viewing this thread

Top